Addonics AD4CFPRJ Quad-CF PCI Controller - Retail
Manufacturer:
Addonics
MFR Part #: AD4CFPRJ
Condition: New
Packaging: Retail
More
Addonics Products
Description
The Quad CF PCI adapter is Addonics newest solution for creating a low cost
large capacity SSD (solid state drive). Designed to fit into any PCI slot,
either standard height or low profile, this adapter allows as many as 4 CF
(Compact Flash) media of any capacity to be used like ordinary hard drives in
any system. Using the built-in firmware utility, the 4 CF cards can be combined
to become one large volume by configuring them as RAID 0, RAID 1, or RAID 10 for
redundancy or as 4 separate drives.
Product Features
- Enable CF to be used like Solid
State Drive (SSD)
- Connects up to 4 CF's - type I/II
cards in slot 1 and slot 2, type I in slot 3 and slot 4
- CF can be configured as 4
individual drives or in RAID 0, RAID 1, RAID 10*
- CF card can be used as boot
device or for extra storage
- Fits standard height or low
profile system
- LED connector for Power and Drive
Activity
- Install into any PCI slot
- Supports UDMA, DMA, and PIO modes
- Supports DOS, Windows 98/ME, NT
4.0, 2000, XP, Vista, Linux kernel 2.4+
*note: Only fixed disk Compact
Flash can be used to create RAID sets. Removable type CF can only be used as
individual drives. Use the SilCfg Management utility to see whether the CF card
is fixed disk or removable type CF. Otherwise, use
Diskpart which is
included with Windows XP.
Specifications
- Connect up to 4 Compact Flash
Type I cards
- CF slot 1 and 2 support Type II
and MicroDrive
- 4 CF's can be set as individual
drive or as RAID 0 (Striped), RAID 1 (Mirrored), and RAID 10 (Mirrored
Striped)*
- CF card can be bootable device
containing OS and application
- Includes standard height and low
profile bracket
- SiICfg Management Utility under
Windows for RAID and device status / report
- LED connector for Power and Drive
Activity
- PCI BUS slot compatible
- Supports UDMA, DMA, and PIO modes
- Features one 256-byte FIFO
(32-bit x 64 deep) for host reads and writes
- Features command buffering from
the PCI to CF
- Features Virtual DMA: Bus master
transfer on the PCI bus and PIO transfer on the ATA bus
- Compliant with PCI Specification,
revision 2.2
- Integrated PCI DMA engines
- 32-bit, 33MHz fully compliant PCI
host interface
- Fully RoHS compliant
- Supports DOS, Windows 98/ME, NT
4.0, 2000, XP, Vista, Linux kernel 2.4+
- Dimensions: 16.7mm(W) x 1mm(D) x
6.5mm(H)
- UPC 605242962095
- 1 year warranty
* RAID 10
(Mirrored-Stripping) combine both Striping and Mirroring technologies to provide
both the performance enhancements that come from Striping and the data
availability and integrity that comes from Mirroring
System Requirement
- PC/AT or Compatible System
- One free PCI slot
- Pentium or greater
- Minimum 32 MB RAM
- 10 MB minimum free hard disk
space
- One of the following
operating systems: DOS, Windows 98/ME, NT 4.0, 2000, XP, Vista, Linux kernel
2.4+
Support
|
